Skip to content

How to clean a washing machine

How to clean a washing machine

To clean a washing machine, run an empty hot cycle with a washing machine cleaner or white vinegar, wipe down the drum and door seal, clean the detergent drawer, and clear the pump filter. Doing this once a month prevents mould, bad smells and limescale build-up, and helps the machine run efficiently.

What you will need

  • Washing machine cleaner or 500ml of white vinegar
  • Bicarbonate of soda (optional)
  • Old toothbrush
  • Microfibre cloth
  • Small bowl or towels (for filter step)

Step-by-step instructions

  1. Clean the detergent drawer. Pull it out fully and soak it in warm soapy water. Use an old toothbrush to scrub away any residue. Rinse and leave to dry before replacing.
  2. Wipe the door seal. Pull back the rubber seal around the door and wipe inside with a damp cloth. Remove any lint, hair or debris. If you spot mould, use a small amount of bicarbonate of soda on the cloth.
  3. Run a hot cleaning cycle. Add a washing machine cleaner tablet to the drum (or pour white vinegar into the detergent drawer). Select the hottest cycle available, typically 60°C or 90°C, and run it empty.
  4. Add bicarbonate of soda (optional). For extra odour removal, run a second short cycle with 100g of bicarbonate of soda added to the drum.
  5. Clean the pump filter. The filter is usually behind a small flap at the bottom front of the machine. Place a towel underneath, unscrew the cap slowly to let water drain, then remove and rinse the filter under a tap. Refit securely.
  6. Wipe the exterior. Clean the outside of the machine, including the control panel and top, with a damp cloth.
  7. Leave the door open. After every wash, leave the door ajar to allow the drum to dry out and prevent mould.

Cleaning frequency guide

Task How often
Hot cleaning cycle Once a month
Door seal wipe Once a week
Detergent drawer Once a month
Pump filter Every three months
Exterior wipe As needed

Frequently asked questions

Can I use bleach to clean a washing machine?

You can use a small amount of diluted bleach on the door seal to treat mould, but avoid adding it to the drum or running a bleach cycle unless the manufacturer specifically permits it. A dedicated washing machine cleaner is safer for regular use.

Why does my washing machine smell even after cleaning?

Persistent smells are usually caused by a blocked or uncleaned pump filter, mould deep in the door seal, or a clogged detergent drawer. Check all three. If the smell remains, the machine may need a service.

How often should I clean my washing machine?

Run a hot cleaning cycle once a month. Wipe the door seal weekly and clean the pump filter every three months. If you do many washes per week, clean more frequently.

Should I use a washing machine cleaner or white vinegar?

Both work. Dedicated washing machine cleaners are formulated for the job and are the simplest option. White vinegar is an effective alternative for descaling and deodourising, though some manufacturers advise against it. Check your appliance manual first.

What temperature kills mould in a washing machine?

Running a cycle at 60°C or 90°C with a cleaning agent is effective at killing mould and bacteria. Modern eco cycles at 30 to 40°C do not reach temperatures high enough to sanitise the drum over time.

Browse our washing machines, including the Indesit IMA864MYTIMEUK 8kg washing machine and the Indesit IMA862MYTIMEUK 8kg washing machine. For more advice, see our buying guides.

Cart 0

Your cart is currently empty.

Start Shopping