Skip to content

Integrated Fridge Freezers: Housing, Door Fixing and Models We List

Integrated fridge freezers fit inside a kitchen unit and are covered by a matching door panel, so they blend into the cabinetry rather than standing out as a separate appliance. All models we list in the integrated fridge freezers collection are 54cm wide. Before ordering, check the installation guide for your chosen model to confirm the exact housing height, depth and door fixing method required.

For a broader comparison of built-in and freestanding options, see our guide to built-in vs freestanding appliances.

What does "integrated" mean?

An integrated fridge freezer sits inside a built-in housing unit and uses a kitchen cabinet door as its visible face. A door panel from your kitchen is fixed to the appliance door so both open together, hiding the appliance completely and giving a seamless finish. Our integrated kitchen appliances guide covers the full range of built-in options if you are planning several appliances at once.

Housing size: what to check before ordering

Measure the housing opening in three places for each dimension and take the smallest reading. The installation guide for each model sets out the minimum and maximum housing dimensions; use those figures rather than any general guide, as requirements vary between models.

  • Width: All models listed here are 54cm wide. Your housing must accommodate this, and the installation guide will give the exact tolerance required.
  • Height: The required housing height varies by model. Check the installation guide for your chosen model before ordering rather than assuming a standard figure.
  • Depth: The required housing depth must also come from the installation guide. Check that pipework or sockets behind the unit do not reduce the available depth.

Our measuring guide explains how to take accurate gap measurements before you order.

Door fixing: what it means and why it matters

Door fixing is the mechanism that attaches your kitchen cabinet panel to the fridge freezer door, so both open as one. There are two common methods:

  • Sliding door fixing: the cabinet panel slides along a rail on the appliance door and is held in place when closed.
  • Fixed door fixing: the cabinet panel is fastened directly and permanently to the appliance door.

The door fixing type for each model is described in its installation guide. If you are replacing an older integrated appliance, check whether your existing cabinetwork is compatible with the new model's fixing method before purchasing.

70/30 vs 50/50 split

A 70/30 model gives a larger fridge section and a smaller freezer, which suits households that buy mostly fresh food and top up frozen supplies less often. A 50/50 model divides the internal space equally between fridge and freezer, which suits households that batch cook or rely more heavily on frozen food. The total capacity for each model is shown in its title; the models listed here include both 70/30 and 50/50 options, all at 54cm wide.

Frost types explained

Each model's title names its frost technology. Here is what each means:

  • Low Frost: ice build-up in the freezer is reduced but not eliminated, so occasional manual defrosting is still needed.
  • No Frost: the freezer section stays frost-free, so no manual defrosting is needed.
  • Total No Frost: both the fridge and freezer sections remain frost-free throughout, so no defrosting is ever needed in either compartment.

Models we list

The table below covers the six models we list in the integrated fridge freezers collection. All are 54cm wide.

Ventilation, fitting and safety

Each model's installation guide specifies the ventilation clearances needed above and around the appliance. Do not reduce these clearances, as adequate airflow affects both performance and safety. Have the appliance installed by a competent person; any electrical or plumbing connections must be completed by a qualified professional. Old appliance removal and installation are available as paid add-ons; see the product page for details.

For full installation guidance, see the appliance installation guide. Our guide to choosing built-in fridges covers additional factors to consider before buying. The best built-in fridges page also lists top picks if you want a useful starting point.

FAQs

What housing size does an integrated fridge freezer need?

All models we list are 54cm wide. For the exact housing height and depth required, refer to the installation guide supplied with your chosen model, as these measurements vary between products.

What does door fixing mean on an integrated fridge freezer?

Door fixing is the method used to attach your kitchen cabinet panel to the appliance door, so both open together. The type, either sliding or fixed, is described in the product's installation guide. Check this before ordering, particularly if you are replacing an existing integrated appliance.

What is the difference between 70/30 and 50/50 integrated fridge freezers?

A 70/30 model gives more internal space to the fridge section, with less for the freezer. A 50/50 model divides the space equally. Which suits you depends on how much fresh food compared with frozen food your household stores.

What is the difference between Low Frost, No Frost and Total No Frost?

Low Frost reduces ice build-up in the freezer but occasional defrosting is still needed. No Frost prevents ice forming in the freezer so no defrosting is required. Total No Frost keeps both the fridge and freezer frost-free throughout, with no defrosting needed in either compartment.

Do I need a qualified installer to fit an integrated fridge freezer?

Installation involves cabinetwork and electrical connections. Follow the manufacturer's installation guide and use a qualified installer for any electrical or plumbing work. Old appliance removal and installation are available as paid add-ons; see the product page for details.

How do I check if a model fits my existing housing?

Measure your housing opening height, width and depth in several places and take the smallest measurement for each dimension. Then compare these figures with the housing dimensions stated in the model's installation guide. Our measuring guide explains how to take accurate measurements.

Browse the full integrated fridge freezers collection to compare all the models we list. For any questions before ordering, call 0333 733 1234 or email customerservices@go-assist.co.uk.

Cart 0

Your cart is currently empty.

Start Shopping