Skip to content

How to clean a dishwasher filter

How to clean a dishwasher filter

To clean a dishwasher filter, remove it by twisting it anticlockwise at the base of the dishwasher, rinse it under warm running water, scrub away any food debris with a soft brush, then refit it. The whole process takes under 10 minutes. Clean your filter at least once a month to prevent blockages and bad odours.

What you will need

  • Soft-bristle brush or old toothbrush
  • Washing-up liquid
  • Warm water
  • Clean cloth

Step-by-step instructions

  1. Empty the dishwasher. Remove the bottom rack and set it aside.
  2. Locate the filter. It sits at the base of the dishwasher, usually in the centre or at the back. Most filters have a cylindrical section sitting inside a flat mesh plate.
  3. Remove the cylindrical filter. Twist it anticlockwise and lift it straight out.
  4. Remove the flat mesh filter. Lift it out underneath where the cylinder sat.
  5. Rinse both parts. Hold them under warm running water to dislodge loose debris.
  6. Scrub gently. Use a soft brush and a small drop of washing-up liquid to remove grease and food particles. Do not use a scouring pad, which can damage the mesh.
  7. Rinse thoroughly. Make sure no soap remains on the filter.
  8. Check the sump area. While the filter is out, wipe around the base of the dishwasher with a damp cloth to remove any debris sitting in the sump.
  9. Refit the filter. Replace the flat mesh first, then lower the cylinder into place and twist clockwise until it locks. It should sit flush with the base.
  10. Replace the bottom rack and run a short cycle to confirm everything is working correctly.

Dishwasher maintenance schedule

Task How often
Clean the filter Once a month
Wipe door seal and edges Once a month
Run a dishwasher cleaner cycle Once a month
Check and refill salt As indicated by the salt light
Check spray arms for blocked holes Every three months

Frequently asked questions

How do I know if my dishwasher filter needs cleaning?

Signs include dishes coming out dirty or with a gritty residue, water pooling in the bottom of the machine after a cycle, or a bad smell when you open the door.

Can a dirty filter damage my dishwasher?

Over time, yes. A severely blocked filter restricts water flow, makes the pump work harder, and can lead to poor wash results and potential mechanical wear. Regular cleaning prevents this.

Do I need to clean my dishwasher filter if I use rinse aid and salt?

Yes. Rinse aid and salt address water softening and drying. They do not remove food particles caught in the filter. Cleaning the filter is a separate task.

My dishwasher filter will not twist out. What should I do?

Check you are turning it anticlockwise. Avoid forcing it. If it appears stuck due to debris, try pouring a small amount of warm water into the base to loosen it before trying again.

How do I clean the spray arms as well?

Remove the spray arms by lifting or unscrewing them (refer to your manual for the exact method). Rinse under warm water and use a toothpick to clear any blocked spray holes. Refit before running the machine.

Browse our dishwashers and slimline dishwashers, including the Hotpoint HP2FFC14BN6WUK full-size dishwasher and the Indesit IN2IE10CS80UK slimline dishwasher. For more advice, see our buying guides.

Cart 0

Your cart is currently empty.

Start Shopping