A vented tumble dryer sends warm, damp air outside through a flexible hose, so it must have a clear route to the exterior of your home. A heat pump tumble dryer recirculates air inside the drum, collecting moisture in a water container or draining it away, so it needs no external venting at all. Choosing between the two comes down to your room layout and wall access: browse our tumble dryers to compare models side by side.
How a vented tumble dryer works
A vented dryer draws room air in, heats it, passes it through the drum to absorb moisture from your laundry, then pushes the warm, damp air out through a hose. That hose connects to an external wall vent, a window adaptor kit, or another opening that leads outside. Cycle times can be short, and the design is straightforward.
The only vented model listed here is the Indesit 8kg Vented Tumble Dryer - White. It has an 8kg drum, two Xpress Cycles of 10 and 30 minutes for quick loads, and an Easy Iron option to reduce creasing.
How a heat pump tumble dryer works
A heat pump dryer uses a closed-loop heat exchanger to warm the air inside the drum. That air absorbs moisture from your laundry, then passes over a cooler section of the exchanger where the moisture condenses and collects, either in a removable water container you empty after each cycle or via a drain hose connected to a waste pipe. Because no air is pushed outside, there is no need for a wall vent or a hose run to a window.
The heat pump models listed here span 7kg up to the largest drum we list. They include the Indesit 7kg Heat Pump Tumble Dryer with QuickCycle - White, the Hotpoint 8kg Heat Pump Tumble Dryer with PetHairCare - White, the Hotpoint 9kg Heat Pump Tumble Dryer with PetHairCare - White, and the Indesit 9kg Heat Pump Tumble Dryer with Steam Technology - White, among others. You can also browse the heat pump tumble dryers collection to filter by capacity.
For a full explanation of the technology, see what is a heat pump tumble dryer and is it worth the extra cost. For a comparison of heat pump dryers against condenser models, see heat pump vs condenser tumble dryer: running costs compared.
Which type suits your room?
The right choice depends on your home layout and access to an external outlet.
A vented dryer suits you if:
- Your room has an external wall already fitted with a vent, or a window through which a hose can pass
- You have a utility room, garage or outbuilding where a vent or window kit can be fitted
- The hose run from the machine to the outlet is short and unobstructed
A heat pump dryer suits you if:
- Your room has no suitable wall vent or window for a hose
- You live in a flat or a property where drilling an external vent is not practical
- You are in rented accommodation where structural changes are not permitted
- You want the dryer in an inner room, a hallway, or a kitchen with no external wall access
If you are thinking of placing a heat pump dryer in a garage or unheated outbuilding, read do heat pump tumble dryers work in cold rooms and garages before you decide.
What to check before you buy
For a vented tumble dryer
- Measure the distance from the planned dryer position to the nearest external vent or window
- Check whether a window adaptor kit is needed and that the window opens wide enough to fit it
- Make sure the hose will not kink or loop back on itself, as restricted airflow affects drying performance
- Confirm the hose length supplied with the model is enough to reach the outlet
For a heat pump tumble dryer
- Check the manufacturer's installation guide for the required ventilation clearances around the machine
- Decide whether you will empty the water container after each cycle or connect the drain hose to a waste pipe
- If connecting to a waste pipe, see can you plumb in a heat pump tumble dryer for what to check, and use a qualified installer for any plumbing connections
- Switch off and unplug before cleaning filters or checking hoses, and follow the manufacturer's installation guide throughout
Models we list
| Model | Type | Capacity | Named features |
|---|---|---|---|
| Indesit 8kg Vented Tumble Dryer - White | Vented | 8kg | Xpress Cycles (10 and 30 min), Easy Iron |
| Indesit 7kg Heat Pump Tumble Dryer with QuickCycle - White | Heat pump | 7kg | QuickCycle |
| Hotpoint 8kg Heat Pump Tumble Dryer with PetHairCare - White | Heat pump | 8kg | PetHairCare, steam |
| Indesit 8kg Heat Pump Tumble Dryer with Steam Technology - White | Heat pump | 8kg | Steam Technology |
| Hotpoint 9kg Heat Pump Tumble Dryer with PetHairCare - White | Heat pump | 9kg | PetHairCare, steam |
| Indesit 9kg Heat Pump Tumble Dryer with Steam Technology - White | Heat pump | 9kg | Steam Technology |
| Hotpoint heat pump tumble dryer: freestanding, 11,0kg | Heat pump | Largest of the models listed | Freestanding |
If you are comparing a Hotpoint 8kg tumble dryer or a Hotpoint black tumble dryer, start with our current Hotpoint tumble dryers collection. For an Indesit 8kg tumble dryer, see the Indesit tumble dryers collection. Check the live listing for colours and types in stock.
FAQs
Does a vented tumble dryer have to be near an outside wall?
Not necessarily next to an outside wall, but the hose must reach a route to the exterior. That can be through an existing wall vent, a window adaptor kit, or a suitable gap that leads outside. A short, straight hose run is preferable, as longer or convoluted routes restrict airflow and can reduce drying performance.
Can I use a heat pump tumble dryer anywhere in my home?
A heat pump dryer does not need an external hose, so it can be placed in rooms without outside wall access. It does need a standard socket, a level floor, and adequate ventilation clearance around the machine. Check the manufacturer's installation guide for the exact spacing required for your chosen model.
How does a heat pump tumble dryer collect moisture from laundry?
Rather than venting moist air outside, a heat pump dryer passes the air over a cooler section of the heat exchanger, where moisture condenses and collects in a removable water container. You empty this after each cycle. Alternatively, if the installation guide for your model allows, you can connect a drain hose to a waste pipe to remove the water automatically.
Can I use a vented tumble dryer in a flat?
It depends on your flat. If there is an external wall with a vent already fitted, or a suitable window for a window adaptor kit, a vented dryer can work. If there is no practical way to route the hose to the outside, a heat pump dryer is a better choice, as it requires no external venting.
Do heat pump tumble dryers work in cold rooms or garages?
Heat pump dryers rely on heat exchange and can be affected by very cold ambient temperatures, which may extend drying times. Check the manufacturer's installation guide for the recommended operating temperature range, and read the guide on whether heat pump tumble dryers work in cold rooms and garages for more detail before placing one in an unheated space.
Browse the full range in our tumble dryers collection, or filter by type in the heat pump tumble dryers collection. For running-cost comparisons between types, visit the UK appliance running costs page. If you have any questions, contact customer services on 0333 733 1234 or customerservices@go-assist.co.uk.


